3D Systems CubePro
3D Systems CubePro
Top 7%108 points
Top 7%
Top specs and features

3D Systems CubePro review: 18 facts and highlights

1. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
3D Systems CubePro
28% have it

2. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
3D Systems CubePro
45% have it

3. Has WiFi

The device can connect to WiFi.
3D Systems CubePro
20% have it

4. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
3D Systems CubePro
55% have it

5. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
3D Systems CubePro
57% have it

6. maximum operating temperature

The maximum temperature at which the device can perform to the optimal level.
280°C
miniFactory 3D Printer: 300°C

7. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
15mm/s
Fabbster Kit: 600mm/s

8. higher z-axis resolution

The highest possible z-axis (vertical) resolution as measured in microns.
100µm
Robox: 0.5µm

9. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
3D Systems CubePro
70% have it

10. height

591mm
Robox: 240mm

11. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
3
Hyrel Professional E5: 4

12. maximum creation size

This is the biggest size of object that you can print.
273 x 241 x 273
Bits from Bytes RapMan Education: 490 x 500 x 850

13. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
3D Systems CubePro
77% have it

14. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
75µm
Printrbot JR v2: 0.4µm

15. weight

38.5kg
Printrbot JR v2: 9.1g

16. thickness

578mm
UP! Plus: 150mm

17. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
3D Systems CubePro
52% have it

18. width

578mm
EnvisionTEC Perfactory Micro: 230mm

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.