3D Systems Cubify Cube
17 facts in comparison
Printrbot JR v2
EnvisionTEC Perfactory Micro
The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
Hyrel Professional E5
Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
Printrbot JR v2
This is the biggest size of object that you can print.
Bits from Bytes RapMan Education
490 x 500 x 850
140 x 140 x 140
350 x 220 x 270
The device can connect to WiFi.
With more USB ports, you are able to connect more devices.
The device is set up and ready to be used with the included software.
As the product arrives fully assembled, you do not have to build it from a kit.
You can operate the device easily, by pressing the screen with your fingers.