AKG K712 vs Onkyo IE-HF300: 18 facts in comparison
1. highest frequency
The highest frequency at which device produces audio. The higher the high-frequency response, the clearer and crispier the treble.
Sony MDR-Z1R: 120000Hz
2. lowest frequency
The lowest frequency at which the device produces audio. The lower the low-frequency response, the stronger and juicier the bass.
Sony MH1CBLK: 1Hz
Sony MDR-EX150AP: 3g
4. has sound isolation/passive noise reduction
The device sits tightly in place, creating an acoustic seal which reduces background noise and prevents your music from leaking out.
45% have it
Impedance is the device’s electrical resistance to the current being pushed through it. The lower the impedance, the easier it is to get higher volume and requires less power.
Flips Solo 2 Social: 4 Ohms
6. sound pressure level
Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
AKG K553 Pro: 144dB/mW
7. no battery needed
This device works without batteries. It weighs less and you don't have to worry about recharging or replacing the battery.
68% have it
8. has a detachable cable
With a detachable cable you can use alternative cables, and if the cable is pulled it will pop out instead of breaking.
38% have it
9. has a tangle free cable
The cable is designed to minimize tangling.
24% have it
10. has an over-the-ear form
Comfortable full-size form with earcups that fully enclose your ears. This model is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. It offers potential for maximum bass and loudness levels.
39% have it
11. has included ear pads
Allows you to change ear pads without buying new ones.
43% have it
12. travel bag is included
The device comes with its own special case or pouch, which is useful for safe transportation.
64% have it
13. has a straight plug
A straight plug is better when the jack is on the top or bottom of your player.
49% have it
14. has an L-shaped plug
An L-shaped plug is better if the jack is on the left or right side of the device, so that the cable isn't bent, and is less likely to break when the device is in your pocket.