Asus RT-N12 D1
With more LAN ports you are able to connect more computers to the network directly using LAN cables.
Asus GX1008B V4
With more USB ports, you are able to connect more devices.
A WAN (Wider Area Network) port is most commonly used to connect the router to the Internet. It can also be used to connect to an external private network.
A higher maximum Wi-Fi speed results in better performance. This is measured in megabytes per second.
Asus GX1008B V5
802.11n is a wireless standard released in 2009. It has faster transfer rates and improved security compared to its predecessors - a, b and g.
Apple Airport Time Capsule
More antennas result in increased signal strength. External antennas can be repositioned in order to improve the signal, and replaced with a longer antenna if needed.
You can enable L2TP Passthrough. L2TP (Layer 2 Tunneling Protocol) is a VPN (Virtual Private Network) protocol for carrying data from one device to another securely over the Internet.
This is a router feature that is designed to authenticate individual users to an external server using a username and password. It is more secure and complex than WPA.
You can enable PPTP (Point-to-point tunneling protocol) Passthrough. This allows VPN connections using PPTP to pass through the router with ease. This method is less secure than L2TP passthrough.
WPA2-PSK is a method of securing your network using WPA2 (Wi-Fi Protected Access 2) as well as a Pre-Shared Key (PSK) password. This was designed for home users without an enterprise authentication server.
You can enable IPsec Passthrough, to allow IPsec (IP Security Protocol) encrypted/authenticated data to pass through your router, enabling increased security.
Allows you to connect securely from a remote location (such as your home) to a LAN (Local Area Network) located in another location such as your office, using PPTP (Point-to-point tunneling protocol).
Dynamic routing is useful if you need to configure several routers, as they can automatically find network destinations and best routes, as well as sharing information between routers. They can reroute automatically if there is a fault somewhere.
With Network Time Protocol (NTP) you can ensure that devices across a network display the exact same time and date, using UTC (Coordinated Universal Time).
Universal Plug n Play (UPnP) is a set of networking protocols that permits networked devices, such as PCs, printers, Internet gateways, Wi-Fi access points and mobile devices to find each other and exchange information on the network.