Audio-Technica ATH-WS77 vs Stax SR-009: 13 facts in comparison
1. highest frequency
The highest frequency at which device produces audio. The higher the high-frequency response, the clearer and crispier the treble.
Brainwavz Kidwavz KV-100: 2780000000Hz
2. lowest frequency
The lowest frequency at which the device produces audio. The lower the low-frequency response, the stronger and juicier the bass.
Sony MH1CBLK: 1Hz
Sony MDR-EX150AP: 3g
Impedance is the device’s electrical resistance to the current being pushed through it. The lower the impedance, the easier it is to get higher volume and requires less power.
Flips Solo 2 Social: 4 Ohms
5. sound pressure level
Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
AKG K553 Pro: 144dB/mW
6. no battery needed
This device works without batteries. It weighs less and you don't have to worry about recharging or replacing the battery.
69% have it
7. has stereo speakers
Devices with stereo speakers deliver sound from independent channels on both left and right sides, creating a richer sound and a better experience.
76% have it
8. has an over-the-ear form
Comfortable full-size form with earcups that fully enclose your ears. This model is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. It offers potential for maximum bass and loudness levels.
40% have it
9. has a straight plug
A straight plug is better when the jack is on the top or bottom of your player.
50% have it
10. has an L-shaped plug
An L-shaped plug is better if the jack is on the left or right side of the device, so that the cable isn't bent, and is less likely to break when the device is in your pocket.
31% have it
11. has a 3.5mm male connector
A standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards.
83% have it
12. cable length
A long cable ensures more freedom of movement.
Pioneer SE-A1000: 6m
13. has an open-back design
The device is designed in a way that allows sound to go out through the back of the ear cups, which usually have vents or perforations. This design provides very natural and accurate sound.