Botmill Glider 3.0
Top 67%2 points
Top 67%
Maximum creation size
Number of 3D printers
lowmidhigh
Top 100%
68 3D printers
11.62 - 17.35M
NaN% of all 3D printersYes
No
maximum creation size
layer thickness
nozzle size
number of extruder heads
1.75mm filament diameter

Botmill Glider 3.0: 15 facts and highlights

1. Has plug and play feature

The device is set up and ready to be used with the included software.
Botmill Glider 3.0
12% have it

2. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Botmill Glider 3.0
45% have it

3. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Botmill Glider 3.0
56% have it

4. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
300µm
Printrbot JR v2: 0.40µm

5. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Botmill Glider 3.0
76% have it

6. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Botmill Glider 3.0
70% have it

7. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
0.01mm/s
Fabbster Kit: 600mm/s

8. height

355mm
Robox: 240mm

9. width

508mm
EnvisionTEC Perfactory Micro: 230mm

10. number of extruder heads

More extruder heads will allow you to use different colours or different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4

11. weight

7.03kg
Printrbot JR v2: 9.10g

12. maximum creation size

This is the biggest size of object that you can print.
203 x 140 x 203
Bits from Bytes RapMan Education: 609 x 500 x 850

13. USB ports

With more USB ports, you are able to connect more devices.
1
FABtotum: 4

14. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Botmill Glider 3.0
51% have it

15. nozzle size

The smaller the nozzle, the more detailed the final product can be. However, when speed of printing is of greater importance than detail, a larger nozzle may be preferable.
0.35mm
Robox: 0.30mm

Top 10 3D printers

Add to comparison
  • Botmill Glider 3.0
Compare