vs
BotMill Glider 3.0
Cubify CubeX Trio
Top 60%46 points
Top 60%
Top 100%0 points
Top 100%
BotMill Glider 3.0
Cubify CubeX Trio
Top specs and features

BotMill Glider 3.0 vs Cubify CubeX Trio: 14 facts in comparison

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
BotMill Glider 3.0
Cubify CubeX Trio
45% have it

2. Has plug and play feature

The device is set up and ready to be used with the included software.
BotMill Glider 3.0
Cubify CubeX Trio
13% have it

3. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
BotMill Glider 3.0
Cubify CubeX Trio
57% have it

4. maximum creation size

This is the biggest size of object that you can print.
203 x 140 x 203
Bits from Bytes RapMan Education: 490 x 500 x 850
185 x 265 x 240

5. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
BotMill Glider 3.0
Cubify CubeX Trio
77% have it

6. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
BotMill Glider 3.0
Cubify CubeX Trio
70% have it

7. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
0.01mm/s
Fabbster Kit: 600mm/s
15mm/s

8. height

243mm shorter.
355mm
Robox: 240mm
598mm

9. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4
3

10. width

7mm narrower.
508mm
EnvisionTEC Perfactory Micro: 230mm
515mm

11. weight

30.97kg lighter.
7.03kg
Printrbot JR v2: 9.1g
38kg

12. USB ports

With more USB ports, you are able to connect more devices.
1
FABtotum: 4
1

13. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
BotMill Glider 3.0
Cubify CubeX Trio
52% have it

14. nozzle size

The smaller the nozzle, the more detailed the final product can be. However, when speed of printing is of greater importance than detail, a larger nozzle may be preferable.
0.35mm
Robox: 0.3mm
100mm

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.