vs
botObjects ProDesk3D
CubePro
Top 20%93 points
Top 20%
Top 100%0 points
Top 100%
botObjects ProDesk3D
CubePro
Top specs and features

botObjects ProDesk3D vs CubePro: 22 facts in comparison

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
botObjects ProDesk3D
CubePro
45% have it

2. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
botObjects ProDesk3D
CubePro
28% have it

3. Has WiFi

The device can connect to WiFi.
botObjects ProDesk3D
CubePro
20% have it

4. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
botObjects ProDesk3D
CubePro
35% have it

5. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
botObjects ProDesk3D
CubePro
57% have it

6. Has plug and play feature

The device is set up and ready to be used with the included software.
botObjects ProDesk3D
CubePro
13% have it

7. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
botObjects ProDesk3D
CubePro
55% have it

8. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
botObjects ProDesk3D
CubePro
14% have it

9. weight

10.5kg lighter.
28kg
Printrbot JR v2: 9.1g
38.5kg

10. width

163mm narrower.
415mm
EnvisionTEC Perfactory Micro: 230mm
578mm

11. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
botObjects ProDesk3D
CubePro
77% have it

12. thickness

163mm thinner.
415mm
UP! Plus: 150mm
578mm

13. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
botObjects ProDesk3D
CubePro
70% have it

14. Prints in full color

Similar to regular 2D printers, this type of 3D printer mixes different colors between cartridges. This process allows the printer to reproduce the color spectrum, therefore allowing you to print in almost any color.
botObjects ProDesk3D
CubePro
7% have it

15. maximum creation size

This is the biggest size of object that you can print.
27.5 x 27.5 x 30
Bits from Bytes RapMan Education: 490 x 500 x 850
273 x 241 x 273

16. higher z-axis resolution

The highest possible z-axis (vertical) resolution as measured in microns.
25µm
Robox: 0.5µm
100µm

17. Has an automatic platform calibrator

This feature saves time and effort in terms of maintenance, however the build platform itself still needs to be manually levelled.
botObjects ProDesk3D
CubePro
14% have it

18. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
25µm
Printrbot JR v2: 0.4µm
75µm

19. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
2
Hyrel Professional E5: 4
3

20. height

31mm shorter.
560mm
Robox: 240mm
591mm

21. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
175mm/s
Fabbster Kit: 600mm/s
15mm/s

22. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
botObjects ProDesk3D
CubePro
52% have it

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.