CubePro
Top 17%5 points
Top 17%
Maximum creation size
Number of 3D printers
lowmidhigh
Top 95%
6 3D printers
17.35M - 34.71M
NaN% of all 3D printersYes
No
maximum creation size
layer thickness
number of extruder heads
1.75mm filament diameter

CubePro: 18 facts and highlights

1. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
CubePro
27% have it
27
0

2. Has WiFi

The device can connect to WiFi.
CubePro
20% have it
27
0

3. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
CubePro
45% have it
26
0

4. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
CubePro
51% have it
26
0

5. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
CubePro
56% have it
26
0

6. maximum operating temperature

The maximum temperature at which the device can perform to the optimal level.
280°C
miniFactory 3D Printer: 300°C
26
0

7. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
15mm/s
Fabbster Kit: 600mm/s
25
0

8. higher z-axis resolution

The highest possible z-axis (vertical) resolution as measured in microns.
100µm
Robox: 0.50µm
25
0

9. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
CubePro
70% have it
25
0

10. height

591mm
Robox: 240mm
25
0

11. number of extruder heads

More extruder heads will allow you to use different colours or different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
3
Hyrel Professional E5: 4
25
0

12. maximum creation size

This is the biggest size of object that you can print.
273 x 241 x 273
Bits from Bytes RapMan Education: 609 x 500 x 850
25
0

13. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
CubePro
76% have it
25
0

14. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
75µm
Printrbot JR v2: 0.40µm
25
0

15. weight

38.50kg
Printrbot JR v2: 9.10g
25
0

16. thickness

578mm
UP! Plus: 150mm
25
0

17. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
CubePro
51% have it
25
0

18. width

578mm
EnvisionTEC Perfactory Micro: 230mm
25
0

Top 10 3D printers

Add to comparison
  • CubePro
Compare