CubeProRepRap Prusa Mendel V2
Top 7%102 points
Top 7%
Top 79%23 points
Top 79%
CubePro
RepRap Prusa Mendel V2
vs
Top specs and features

CubePro vs RepRap Prusa Mendel V2: 16 facts in comparison

1. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
CubePro
RepRap Prusa Mendel V2
27% have it

2. Has WiFi

The device can connect to WiFi.
CubePro
RepRap Prusa Mendel V2
20% have it

3. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
CubePro
RepRap Prusa Mendel V2
35% have it

4. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
CubePro
RepRap Prusa Mendel V2
56% have it

5. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
CubePro
RepRap Prusa Mendel V2
45% have it

6. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
CubePro
RepRap Prusa Mendel V2
51% have it

7. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
CubePro
RepRap Prusa Mendel V2
70% have it

8. width

146mm narrower.
578mm
EnvisionTEC Perfactory Micro: 230mm
432mm

9. height

185mm shorter.
591mm
Robox: 240mm
406mm

10. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
15mm/s
Fabbster Kit: 600mm/s
250mm/s

11. thickness

146mm thinner.
578mm
UP! Plus: 150mm
432mm

12. weight

31.5kg lighter.
38.5kg
Printrbot JR v2: 9.1g
7kg

13. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
75µm
Printrbot JR v2: 0.4µm
100µm

14. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
CubePro
RepRap Prusa Mendel V2
51% have it

16. maximum creation size

This is the biggest size of object that you can print.
273 x 241 x 273
Bits from Bytes RapMan Education: 490 x 500 x 850
225 x 225 x 140

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.