DiNotte XML-3
DiNotte XML-3
Top 27%193 points
Top 27%
Top specs, facts and figures

DiNotte XML-3 review: 25 facts and highlights

1. has a battery level indicator

An indicator shows you when the device has low battery.
DiNotte XML-3
89% have it

2. runtime (high mode)

The amount of time the light will last from a full charge when on high mode. High mode is a steady light mode at the highest intensity.
2.5h
DiNotte XML-1: 5h

3. Weather sealed

Device is protected with extra seals to prevent failures due to any kind of weather.
DiNotte XML-3
88% have it

4. brightness (high mode)

The light is more intense on high mode. The amount of light emitted is measured in lumens.
1500lm
Lupine Betty R 7: 4500lm

5. charge time

The time it takes to fully charge the battery.
4h
Moon X Power 1300: 2.5h

6. runtime (low mode)

The amount of time the light will last from a full charge when on low mode. Low mode is a steady light mode at a low intensity.
10h
Lupine Piko 7: 116h

7. lumens per gram

It emits more lumens of light per gram of weight.
15
Exposure Lights Equinox: 16.12

8. weight

100g
Serfas TSL-200: 50g

9. has a rechargeable battery

The battery can be recharged and used over again.
DiNotte XML-3
95% have it

10. runtime (mid mode)

The amount of time the light will last from a full charge when on mid mode. Mid mode is a steady light mode at a medium intensity.
5h
Lupine Piko 7: 12h

11. brightness (mid mode)

The light is more intense on mid mode. The amount of light emitted is measured in lumens.
750lm
Lupine Betty R 7: 2400lm

12. Has SOS mode

The light has an SOS mode. This is used in emergency situations to attract attention.
DiNotte XML-3
23% have it

13. Has pulse mode

The light has a pulse mode. Pulse mode has the benefit of saving battery by slowly changing between a high and low-intensity light, while maintaining a steady light, which is less distracting.
DiNotte XML-3
24% have it

14. Can be mounted on helmet

A helmet mounted light is more suitable for night-time mountain biking as the light follows your head around tight corners and bends.
DiNotte XML-3
69% have it

15. Has side lights

It has extra lights on the side, helping to make the rider more visible.
DiNotte XML-3
13% have it

16. Has tool-less mount

It has a tool-less mount, making it easier to put on and remove. This is particularly useful in big cities where crime is more prevalent.
DiNotte XML-3
96% have it

17. number of light modes

With more light modes you are more likely to find the perfect setting for any given situation, such as when you need the brightest light or when you need to conserve battery.
6
Lupine Piko U4: 15

18. brightness (low mode)

The light is more intense on low mode. The amount of light emitted is measured in lumens.
375lm
NiteRider Pro 3600 DIY: 1000lm

19. height

40mm
Lupine Piko U4: 24mm

20. All-in-one light

The bike light is an all-in-one. Some lights feature a separate battery that is connected to the light via a cable, but an all-in-one light is more compact and cable-free.
DiNotte XML-3
57% have it

21. width

65mm
Lupine Piko U4: 32mm

22. Can be mounted on handlebars

Mounted to your handlebars, the light is more suitable for biking on roads.
DiNotte XML-3
96% have it

23. battery power

4400mAh
Exposure Lights Six Pack Mk4: 14500mAh

24. runtime (flash mode)

The amount of time the light will last from a full charge when on flash/strobe mode. This mode quickly turns the light on and off, which has the benefit of saving battery.
7.5h
Lumicycle Apex: 120h

25. Has additional light for helmet

This bike light includes both a front and a rear helmet light. These lights have been shown to make the rider more visible and increase safety on the roads.
DiNotte XML-3
3% have it

Top 10 bike lights

Add to comparison
    Compare
    This page is currently only available in English.