67points

EVGA X79 Dark

EVGA X79 Dark
vs

EVGA X79 Dark review: specs and price

EVGA X79 Dark

Why is EVGA X79 Dark better than the average?

  • RAM speed
    ?

    2400MHzvs2264.25MHz
  • Fan headers
    ?

    6vs4.56
  • Memory slots
    ?

    8vs3.95
  • PCIe 3.0 x16 slots
    ?

    5vs1.98
  • USB 3.0 ports
    ?

    4vs3.99
  • Memory channels
    ?

    4vs2.23
  • Signal-to-Noise ratio (DAC)
    ?

    110dBvs107.89dB
  • Maximum memory size
    ?

    64GBvs62.57GB

Price comparison

General info

The motherboard has a button or switch on the rear panel to clear the CMOS, which resets the BIOS to factory settings. This is useful if something goes wrong with the BIOS which stops your computer from booting, as you can reset the BIOS without opening the case to access the CMOS jumper.
The number of GPUs supported when using a multi-GPU configuration. Using more than one GPU in parallel can give increased performance.
The motherboard has more CPU sockets. Multiple CPUs are typically used in servers.
Bluetooth is a wireless technology standard that allows data transfers between devices placed in close proximity, using short-wavelength, ultra-high frequency radio waves. Newer versions provide faster data transfers.
When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction.
6.height

263.5mm

The height represents the vertical dimension of the product. We consider a smaller height better because it assures easy maneuverability.

Memory

It can support faster memory, which will give quicker system performance.
More memory slots (also known as DIMM slots) allow you to add more RAM to your computer. It is also useful when upgrading, as you can add RAM to an empty slot instead of replacing an existing memory module.
More memory channels increases the speed of data transfer between the memory and the CPU.
The maximum amount of memory (RAM) supported.

Connectors

Fan headers are connection points on the motherboard that cooling fans can be connected to. Fans can also be connected straight to the power supply, but when connected to the motherboard you gain much finer control over them through software.
SATA is an interface used to connect mass storage devices such as hard drives and Blu-ray drives. SATA 3 has a native transfer rate of 6 Gbit/s, which is twice as fast as SATA 2, the previous revision. This is particularly useful if you use an SSD as it can perform at higher speeds.
More USB 3.0 ports allow you to connect more devices to your computer that support USB 3.0. USB 3.0 is an improved version of USB 2.0 which offers faster transfer rates.
The motherboard has USB 3.0 headers, which are pin connections that you can connect additional USB ports to.
RJ-45 ports are used for LAN (Local Area Network) connections. With more ports you can achieve increased bandwidth across a LAN, or connect to multiple networks. It also has the added benefit of not losing connection to the network if one fails.
The motherboard has USB 2.0 headers, which are pin connections that you can connect additional USB ports to.

Expansion slots

PCIe slots allow you to connect various components to the motherboard, such as graphics cards and sound cards. The number after the 'x' represents the number of lanes, with more lanes supporting higher data transfer rates. PCI Express 3.0 has a bit rate of 8 GT/s, delivering 985 MB/s per lane.
PCIe slots allow you to connect graphics cards, SSDs, and other components to the motherboard. The number after the 'x' represents the number of lanes, with more lanes supporting higher data transfer rates. PCI Express 2.0 has a transfer rate of 5 GT/s, providing 500 MB/s per lane.
Using PCIe slots, you can connect different components to your motherboard, such as graphics cards and RAID cards. The number after the 'x' represents the number of data-transmission lanes. More lanes result in faster data transfer rates. A PCIe x1 slot has one lane and can move data at one bit per cycle.
PCI slots allow you to connect peripherals to the motherboard, most commonly graphics cards but also others such as sound cards and network cards. PCI has been superseded by PCI Express which offers faster data transfer rates, but many cards today still use PCI.
PCIe slots enable you to connect various components to your motherboard, for example, graphics cards, RAID cards, SSDs. The number of data-transmission lanes (specified by the number following 'x') determines the data transfer rate. A PCIe x4 slot has 4 lanes, with a speed of 4 bits per cycle.
PCIe slots allow you to connect components such as graphics cards and sound cards to the motherboard. The number after the 'x' represents the number of data-transmission lanes. More lanes result in faster data transfer rates. A PCIe x8 slot has 8 lanes and can move data at 8 bit per cycle.

Audio

When a digital signal is converted to an analog one (for example when playing audio through speakers or headphones), a certain amount of noise is carried in the signal. A higher SNR means that there is less noise and the audio quality is better.
Each channel is a separate stream of audio information. More channels can provide a more realistic experience, such as providing surround sound.
More connectors means that more audio devices such as speakers or microphones can be connected.
S/PDIF is an interface used to transmit digital audio with high fidelity.

Storage

1.Supports RAID 1
EVGA X79 Dark
RAID is a storage technology that combines multiple disks into one unit. RAID 1 mirrors the data across the drives. This gives you greater data security as if one drive fails, the data will still be accessible from another.
2.Supports RAID 5
EVGA X79 Dark
RAID is a storage technology that combines multiple disks into one unit. RAID 5 stripes the data across the drives, giving increased performance compared to a single disk. It also provides greater data security as if one drive fails, the data will still be accessible from another due to the use of parity.
3.Supports RAID 0
EVGA X79 Dark
RAID is a storage technology that combines multiple disks into one unit. RAID 0 stripes the data across the drives, giving increased performance and capacity compared to a single drive. The drawback is that if one drive fails, you lose the data on all drives.
RAID is a storage technology that combines multiple disks into one unit. RAID 10 (1+0) stripes and mirrors the data across the drives. It gives increased capacity and performance compared to a single disk. It also provides greater data security as if one drive fails, the data will still be accessible from another.
5.Supports RAID 0+1
EVGA X79 Dark
RAID is a storage technology that combines multiple disks into one unit. RAID 0+1 stripes and mirrors the data across the drives. This gives increased capacity and performance compared to a single disk. It also provides greater data security in case one drive fails, as the data will still be accessible from another.

Price comparison

Which are the best motherboards?

Show all
This page is currently only available in English.