FablicatorCubePro
Top 27%80 points
Top 27%
Top 7%102 points
Top 7%
Fablicator
CubePro
vs
Top specs and features

Fablicator vs CubePro: 19 facts in comparison

1. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
Fablicator
CubePro
27% have it

2. Has WiFi

The device can connect to WiFi.
Fablicator
CubePro
20% have it

3. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Fablicator
CubePro
51% have it

4. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Fablicator
CubePro
56% have it

5. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Fablicator
CubePro
45% have it

6. maximum operating temperature

The maximum temperature at which the device can perform to the optimal level.
300°C
miniFactory 3D Printer: 300°C
280°C

7. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
Fablicator
CubePro
35% have it

8. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Fablicator
CubePro
70% have it

9. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Fablicator
CubePro
76% have it

10. thickness

133mm thinner.
445mm
UP! Plus: 150mm
578mm

11. height

70mm shorter.
521mm
Robox: 240mm
591mm

12. weight

18.5kg lighter.
20kg
Printrbot JR v2: 9.1g
38.5kg

13. maximum creation size

This is the biggest size of object that you can print.
177.8 x 177.8 x 177.8
Bits from Bytes RapMan Education: 490 x 500 x 850
273 x 241 x 273

14. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4
3

15. width

121mm narrower.
457mm
EnvisionTEC Perfactory Micro: 230mm
578mm

16. Prints in HIPS

The printer is able to print in High Impact Polystyrene (HIPS). HIPS is similar to ABS plastic, but uses different solvents (limonene rather than acetone). HIPS is easy to paint and glue.
Fablicator
CubePro
7% have it

17. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Fablicator
CubePro
51% have it

18. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
80mm/s
Fabbster Kit: 600mm/s
15mm/s

19. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
100µm
Printrbot JR v2: 0.4µm
75µm
Add to comparison
    Compare
    This page is currently only available in English.