21 facts in comparison
Printrbot JR v2
Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
The maximum temperature at which the device can perform to the optimal level.
miniFactory 3D Printer
EnvisionTEC Perfactory Micro
The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
The printer is able to print in wood. This typically involves printing using a mixture of wood particles and a binding agent, which dries as solid wood.
The printer is able to print in High Impact Polystyrene (HIPS). HIPS is similar to ABS plastic, but uses different solvents (limonene rather than acetone). HIPS is easy to paint and glue.
Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Similar to regular 2D printers, this type of 3D printer mixes different colors between cartridges. This process allows the printer to reproduce the color spectrum, therefore allowing you to print in almost any color.
The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
Printrbot JR v2
The device can connect to Wi-Fi.
The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
802.11n is a wireless standard released in 2009. It has faster transfer rates and improved security compared to its predecessors - a, b and g.
The device is set up and ready to be used with the included software.
As the product arrives fully assembled, you do not have to build it from a kit.