FablicatorRobox
Top 27%80 points
Top 27%
Top 39%67 points
Top 39%
Fablicator
Robox
vs
Top specs and features

Fablicator vs Robox: 22 facts in comparison

1. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
Fablicator
Robox
27% have it

2. Has WiFi

The device can connect to WiFi.
Fablicator
Robox
20% have it

3. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Fablicator
Robox
51% have it

4. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Fablicator
Robox
56% have it

5. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Fablicator
Robox
45% have it

6. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
Fablicator
Robox
35% have it

7. Has plug and play feature

The device is set up and ready to be used with the included software.
Fablicator
Robox
12% have it

8. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
100µm
Printrbot JR v2: 0.4µm
20µm

9. height

281mm shorter.
521mm
Robox: 240mm
240mm

10. maximum creation size

This is the biggest size of object that you can print.
177.8 x 177.8 x 177.8
Bits from Bytes RapMan Education: 490 x 500 x 850
210 x 100 x 150

11. USB ports

With more USB ports, you are able to connect more devices.
2
FABtotum: 4
0

12. thickness

105mm thinner.
445mm
UP! Plus: 150mm
340mm

13. width

87mm narrower.
457mm
EnvisionTEC Perfactory Micro: 230mm
370mm

14. Prints in HIPS

The printer is able to print in High Impact Polystyrene (HIPS). HIPS is similar to ABS plastic, but uses different solvents (limonene rather than acetone). HIPS is easy to paint and glue.
Fablicator
Robox
7% have it

15. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Fablicator
Robox
51% have it

16. nozzle size

The smaller the nozzle, the more detailed the final product can be. However, when speed of printing is of greater importance than detail, a larger nozzle may be preferable.
0.35mm
Robox: 0.3mm
0.3mm

17. Has an automatic platform calibrator

This feature saves time and effort in terms of maintenance, however the build platform itself still needs to be manually levelled.
Fablicator
Robox
14% have it

18. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Fablicator
Robox
14% have it

19. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Fablicator
Robox
70% have it

20. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Fablicator
Robox
76% have it

21. Prints in full color

Similar to regular 2D printers, this type of 3D printer mixes different colors between cartridges. This process allows the printer to reproduce the color spectrum, therefore allowing you to print in almost any color.
Fablicator
Robox
6% have it

22. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4
2
Add to comparison
    Compare
    This page is currently only available in English.