The highest frequency at which device produces audio. The higher the high-frequency response, the clearer and crispier the treble.
Sony MDR-Z1R: 120000Hz
2. lowest frequency
The lowest frequency at which the device produces audio. The lower the low-frequency response, the stronger and juicier the bass.
Sony MH1CBLK: 1Hz
AKG IP2: 3g
Impedance is the device’s electrical resistance to the current being pushed through it. The lower the impedance, the easier it is to get higher volume and requires less power.
Flips Solo 2 Social: 4Ohms
5. sound pressure level
Devices with a higher sound pressure level are generally louder when supplied with any given audio source.
Audeze EL-8 Titanium: 130dB/mW
6. no battery needed
This device works without batteries. It weighs less and you don't have to worry about recharging or replacing the battery.
73% have it
7. has a detachable cable
With a detachable cable you can use alternative cables, and if the cable is pulled it will pop out instead of breaking.
37% have it
8. has a straight plug
A straight plug is better when the jack is on the top or bottom of your player.
54% have it
9. has an over-the-ear form
Comfortable full-size form with earcups that fully enclose your ears. This model is loved for its increased sound isolation and the fact that it won't leak sound to your neighbors. It offers potential for maximum bass and loudness levels.
42% have it
10. cable length
A long cable ensures more freedom of movement.
Pioneer SE-A1000: 6m
11. has a 3.5mm male connector
A standard 3.5mm male connector is suitable for use with all MP3 players and computer sound cards.
87% have it
12. is open backed
The device is designed to allow sound out through the back of the earcup and provides very natural and accurate sound. It's good for home listening.