Leapfrog Creatr
Leapfrog Creatr
Top 82%20 points
Top 82%
Top specs and features

Leapfrog Creatr: 18 facts and highlights

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Leapfrog Creatr
45% have it

2. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Leapfrog Creatr
56% have it

3. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
60mm/s
Fabbster Kit: 600mm/s

4. maximum creation size

This is the biggest size of object that you can print.
270 x 230 x 200
Bits from Bytes RapMan Education: 490 x 500 x 850

5. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
50µm
Printrbot JR v2: 0.4µm

6. weight

32kg
Printrbot JR v2: 9.1g

7. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Leapfrog Creatr
70% have it

8. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Leapfrog Creatr
14% have it

9. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Leapfrog Creatr
76% have it

10. thickness

600mm
UP! Plus: 150mm

11. power consumption operation

How much power the device consumes when it's switched on.
400W
Bits from Bytes RapMan Education: 60W

12. width

500mm
EnvisionTEC Perfactory Micro: 230mm

13. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4

14. number of colors per print

A single design can be made up using different colored materials simultaneously.
1
Da Vinci 3D Printer: 12

15. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Leapfrog Creatr
51% have it

16. volume

150000cm³
Da Vinci 3D Printer: cm³

17. height

500mm
Robox: 240mm

18. USB ports

With more USB ports, you are able to connect more devices.
0
FABtotum: 4

Top 10 3D printers

Add to comparison
  • Leapfrog Creatr
Compare
This page is currently only available in English.