vs
Leapfrog Creatr Dual Extruder
Robox
Top 74%1,345 points
Top 74%
Top 30%3,567 points
Top 30%
Leapfrog Creatr Dual Extruder
Robox
Top specs and features

Leapfrog Creatr Dual Extruder vs Robox: 21 facts in comparison

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Leapfrog Creatr Dual Extruder
Robox
45% have it

2. Has WiFi

The device can connect to WiFi.
Leapfrog Creatr Dual Extruder
Robox
20% have it

3. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Leapfrog Creatr Dual Extruder
Robox
55% have it

4. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Leapfrog Creatr Dual Extruder
Robox
57% have it

5. Has plug and play feature

The device is set up and ready to be used with the included software.
Leapfrog Creatr Dual Extruder
Robox
13% have it

6. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
2
Hyrel Professional E5: 4
2

7. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Leapfrog Creatr Dual Extruder
Robox
14% have it

8. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Leapfrog Creatr Dual Extruder
Robox
77% have it

9. width

130mm narrower.
500mm
EnvisionTEC Perfactory Micro: 230mm
370mm

10. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Leapfrog Creatr Dual Extruder
Robox
52% have it

11. thickness

260mm thinner.
600mm
UP! Plus: 150mm
340mm

12. nozzle size

The smaller the nozzle, the more detailed the final product can be. However, when speed of printing is of greater importance than detail, a larger nozzle may be preferable.
0.35mm
Robox: 0.3mm
0.3mm

13. USB ports

With more USB ports, you are able to connect more devices.
1
FABtotum: 4
0

14. volume

79.87% less body volume.
150000cm³
Afinia H-Series: 22204cm³
30192cm³

15. height

260mm shorter.
500mm
Robox: 240mm
240mm

16. maximum creation size

This is the biggest size of object that you can print.
270 x 230 x 200
Bits from Bytes RapMan Education: 490 x 500 x 850
210 x 100 x 150

17. Has an automatic platform calibrator

This feature saves time and effort in terms of maintenance, however the build platform itself still needs to be manually levelled.
Leapfrog Creatr Dual Extruder
Robox
14% have it

18. Prints in HIPS

The printer is able to print in High Impact Polystyrene (HIPS). HIPS is similar to ABS plastic, but uses different solvents (limonene rather than acetone). HIPS is easy to paint and glue.
Leapfrog Creatr Dual Extruder
Robox
8% have it

19. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
50µm
Printrbot JR v2: 0.4µm
20µm

20. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Leapfrog Creatr Dual Extruder
Robox
70% have it

21. Prints in full color

Similar to regular 2D printers, this type of 3D printer mixes different colors between cartridges. This process allows the printer to reproduce the color spectrum, therefore allowing you to print in almost any color.
Leapfrog Creatr Dual Extruder
Robox
7% have it

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.