vs
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
Top 74%1,345 points
Top 74%
Top 33%3,441 points
Top 33%
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
Top specs and features

Leapfrog Creatr Dual Extruder vs Stratasys uPrint SE Plus: 19 facts in comparison

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
45% have it

2. Has WiFi

The device can connect to WiFi.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
20% have it

3. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
28% have it

4. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
55% have it

5. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
57% have it

6. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
2
Hyrel Professional E5: 4
1

7. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
70% have it

8. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
14% have it

9. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
77% have it

10. thickness

60mm thinner.
600mm
UP! Plus: 150mm
660mm

11. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Leapfrog Creatr Dual Extruder
Stratasys uPrint SE Plus
52% have it

12. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
50µm
Printrbot JR v2: 0.4µm
330µm

13. number of colors per print

A single design can be made up using different colored materials simultaneously.
2
XYZprinting da Vinci 1.0: 12
10

14. USB ports

With more USB ports, you are able to connect more devices.
1
FABtotum: 4
0

15. volume

54.52% less body volume.
150000cm³
Afinia H-Series: 22204cm³
329831.7cm³

16. maximum creation size

This is the biggest size of object that you can print.
270 x 230 x 200
Bits from Bytes RapMan Education: 490 x 500 x 850
152 x 203 x 203

17. weight

44kg lighter.
32kg
Printrbot JR v2: 9.1g
76kg

18. height

287mm shorter.
500mm
Robox: 240mm
787mm

19. width

135mm narrower.
500mm
EnvisionTEC Perfactory Micro: 230mm
635mm

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.