Lupine Wilma 10
Lupine Wilma 10
Top 13%229 points
Top 13%
Top specs, facts and figures

Lupine Wilma 10 review: 25 facts and highlights

1. runtime (high mode)

The amount of time the light will last from a full charge when on high mode. High mode is a steady light mode at the highest intensity.
2.5h
DiNotte XML-1: 5h

2. brightness (high mode)

The light is more intense on high mode. The amount of light emitted is measured in lumens.
2800lm
Lupine Betty R 7: 4500lm

3. charge time

The time it takes to fully charge the battery.
5h
Moon X Power 1300: 2.5h

4. has a battery level indicator

An indicator shows you when the device has low battery.
Lupine Wilma 10
90% have it

5. Weather sealed

Device is protected with extra seals to prevent failures due to any kind of weather.
Lupine Wilma 10
88% have it

6. runtime (low mode)

The amount of time the light will last from a full charge when on low mode. Low mode is a steady light mode at a low intensity.
47.5h
Lupine Piko 7: 116h

7. lumens per gram

It emits more lumens of light per gram of weight.
5.83
Exposure Lights Equinox: 16.12

8. weight

480g
Serfas TSL-200: 50g

9. brightness (mid mode)

The light is more intense on mid mode. The amount of light emitted is measured in lumens.
1630lm
Lupine Betty R 7: 2400lm

10. has a rechargeable battery

The battery can be recharged and used over again.
Lupine Wilma 10
95% have it

11. runtime (mid mode)

The amount of time the light will last from a full charge when on mid mode. Mid mode is a steady light mode at a medium intensity.
5h
Lupine Piko 7: 12h

12. Has SOS mode

The light has an SOS mode. This is used in emergency situations to attract attention.
Lupine Wilma 10
23% have it

13. Has pulse mode

The light has a pulse mode. Pulse mode has the benefit of saving battery by slowly changing between a high and low-intensity light, while maintaining a steady light, which is less distracting.
Lupine Wilma 10
24% have it

14. warranty period

When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction.
2
Exposure Lights Reflex Mk2: 2

15. Can be mounted on helmet

A helmet mounted light is more suitable for night-time mountain biking as the light follows your head around tight corners and bends.
Lupine Wilma 10
70% have it

16. Has side lights

It has extra lights on the side, helping to make the rider more visible.
Lupine Wilma 10
14% have it

17. Has tool-less mount

It has a tool-less mount, making it easier to put on and remove. This is particularly useful in big cities where crime is more prevalent.
Lupine Wilma 10
96% have it

18. brightness (low mode)

The light is more intense on low mode. The amount of light emitted is measured in lumens.
210lm
NiteRider Pro 3600 DIY: 1000lm

19. All-in-one light

The bike light is an all-in-one. Some lights feature a separate battery that is connected to the light via a cable, but an all-in-one light is more compact and cable-free.
Lupine Wilma 10
58% have it

20. number of light modes

With more light modes you are more likely to find the perfect setting for any given situation, such as when you need the brightest light or when you need to conserve battery.
13
Lupine Piko U4: 15

21. Can be mounted on handlebars

Mounted to your handlebars, the light is more suitable for biking on roads.
Lupine Wilma 10
96% have it

22. angle of light

The light is spread out over a wider area, making it easier to see where you are going.
26°
Light & Motion Vis 360: 360°

23. width

40mm
Lupine Piko U4: 32mm

24. battery power

9900mAh
Exposure Lights Six Pack Mk4: 14500mAh

25. Has additional light for helmet

This bike light includes both a front and a rear helmet light. These lights have been shown to make the rider more visible and increase safety on the roads.
Lupine Wilma 10
3% have it

Top 10 bike lights

Add to comparison
    Compare
    This page is currently only available in English.