NiteRider Pro 2200 Dual Beam Race
NiteRider Pro 2200 Dual Beam Race
Top 44%149 points
Top 44%
Top specs, facts and figures

NiteRider Pro 2200 Dual Beam Race: 21 facts and highlights

1. Weather sealed

Device is protected with extra seals to prevent failures due to any kind of weather.
NiteRider Pro 2200 Dual Beam Race
88% have it

2. brightness (high mode)

The light is more intense on high mode. The amount of light emitted is measured in lumens.
2200lm
Lupine Betty R 7: 4500lm

3. runtime (high mode)

The amount of time the light will last from a full charge when on high mode. High mode is a steady light mode at the highest intensity.
1.25h
DiNotte XML-1: 5h

4. has a battery level indicator

An indicator shows you when the device has low battery.
NiteRider Pro 2200 Dual Beam Race
89% have it

5. charge time

The time it takes to fully charge the battery.
6h
Moon X Power 1300: 2.5h

6. runtime (low mode)

The amount of time the light will last from a full charge when on low mode. Low mode is a steady light mode at a low intensity.
5h
Lupine Piko 7: 116h

7. weight

580g
Serfas TSL-200: 50g

8. lumens per gram

It emits more lumens of light per gram of weight.
3.79
Exposure Lights Equinox: 16.12

9. Has side lights

It has extra lights on the side, helping to make the rider more visible.
NiteRider Pro 2200 Dual Beam Race
13% have it

10. brightness (mid mode)

The light is more intense on mid mode. The amount of light emitted is measured in lumens.
1200lm
Lupine Betty R 7: 2400lm

11. warranty period

When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction.
2
Exposure Lights Reflex Mk2: 2

12. Can be mounted on helmet

A helmet mounted light is more suitable for night-time mountain biking as the light follows your head around tight corners and bends.
NiteRider Pro 2200 Dual Beam Race
69% have it

13. has a rechargeable battery

The battery can be recharged and used over again.
NiteRider Pro 2200 Dual Beam Race
95% have it

14. runtime (mid mode)

The amount of time the light will last from a full charge when on mid mode. Mid mode is a steady light mode at a medium intensity.
2.5h
Lupine Piko 7: 12h

16. Has tool-less mount

It has a tool-less mount, making it easier to put on and remove. This is particularly useful in big cities where crime is more prevalent.
NiteRider Pro 2200 Dual Beam Race
96% have it

17. Has SOS mode

The light has an SOS mode. This is used in emergency situations to attract attention.
NiteRider Pro 2200 Dual Beam Race
23% have it

18. All-in-one light

The bike light is an all-in-one. Some lights feature a separate battery that is connected to the light via a cable, but an all-in-one light is more compact and cable-free.
NiteRider Pro 2200 Dual Beam Race
57% have it

19. brightness (low mode)

The light is more intense on low mode. The amount of light emitted is measured in lumens.
600lm
NiteRider Pro 3600 DIY: 1000lm

20. Has additional light for helmet

This bike light includes both a front and a rear helmet light. These lights have been shown to make the rider more visible and increase safety on the roads.
NiteRider Pro 2200 Dual Beam Race
3% have it

21. Can be mounted on handlebars

Mounted to your handlebars, the light is more suitable for biking on roads.
NiteRider Pro 2200 Dual Beam Race
96% have it

Top 10 bike lights

Add to comparison
    Compare
    This page is currently only available in English.