Object24 Desktop 3D Printer
Printrbot JR v2
Top 100%0 points
Top 100%
Top 68%37 points
Top 68%
Object24 Desktop 3D Printer
Printrbot JR v2
Top specs and features

Object24 Desktop 3D Printer vs Printrbot JR v2: 15 facts in comparison

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Object24 Desktop 3D Printer
Printrbot JR v2
45% have it

2. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Object24 Desktop 3D Printer
Printrbot JR v2
55% have it

3. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Object24 Desktop 3D Printer
Printrbot JR v2
57% have it

4. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
Printrbot JR v2: 0.4µm

5. weight

92.99kg lighter.
Printrbot JR v2: 9.1g

6. maximum creation size

This is the biggest size of object that you can print.
192 x 150 x 234
Bits from Bytes RapMan Education: 490 x 500 x 850
150 x 150 x 150

7. higher z-axis resolution

The highest possible z-axis (vertical) resolution as measured in microns.
Robox: 0.5µm

8. thickness

315mm thinner.
UP! Plus: 150mm

9. volume

90.39% less body volume.
Afinia H-Series: 22204cm³

10. width

323mm narrower.
EnvisionTEC Perfactory Micro: 230mm

11. height

469mm shorter.
Robox: 240mm

12. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Object24 Desktop 3D Printer
Printrbot JR v2
77% have it

13. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Object24 Desktop 3D Printer
Printrbot JR v2
70% have it

14. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Object24 Desktop 3D Printer
Printrbot JR v2
52% have it

15. USB ports

With more USB ports, you are able to connect more devices.
FABtotum: 4

Top 10 3D printers

Add to comparison
    This page is currently only available in English.