vs
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
Top 100%0 points
Top 100%
Top 57%50 points
Top 57%
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
Top specs and features

Object24 Desktop 3D Printer vs The Future is 3D Glacier Peak: 13 facts in comparison

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
45% have it

2. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
55% have it

3. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
35% have it

4. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
57% have it

5. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
28µm
Printrbot JR v2: 0.4µm
200µm

6. weight

63.52kg lighter.
93kg
Printrbot JR v2: 9.1g
29.48kg

7. thickness

316mm thinner.
620mm
UP! Plus: 150mm
304mm

8. USB ports

With more USB ports, you are able to connect more devices.
0
FABtotum: 4
1

9. width

19mm narrower.
590mm
EnvisionTEC Perfactory Micro: 230mm
609mm

10. height

267mm shorter.
825mm
Robox: 240mm
558mm

11. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Object24 Desktop 3D Printer
The Future is 3D Glacier Peak
77% have it

12. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4
1

13. number of colors per print

A single design can be made up using different colored materials simultaneously.
1
XYZprinting da Vinci 1.0: 12
1

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.