versus logo
vs
vs
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
Top 37%74 points
Top 37%
Top 81%22 points
Top 81%
Top 39%71 points
Top 39%
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
Top specs and features

Robox vs MakerBot Replicator 2 vs Stratasys uPrint SE Plus: 21 facts in comparison

1. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
28% have it

2. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
45% have it

3. Has WiFi

The device can connect to WiFi.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
20% have it

4. Has plug and play feature

The device is set up and ready to be used with the included software.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
13% have it

5. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
57% have it

6. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
52% have it

7. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
35% have it

8. thickness

340mm
UP! Plus: 150mm
550mm
660mm

9. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
14% have it

10. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
70% have it

11. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
2
Hyrel Professional E5: 4
1
1

12. Prints in full color

Similar to regular 2D printers, this type of 3D printer mixes different colors between cartridges. This process allows the printer to reproduce the color spectrum, therefore allowing you to print in almost any color.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
7% have it

13. height

240mm
Robox: 240mm
430mm
787mm

14. width

370mm
EnvisionTEC Perfactory Micro: 230mm
590mm
635mm

15. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
52% have it

16. maximum creation size

This is the biggest size of object that you can print.
210 x 100 x 150
Bits from Bytes RapMan Education: 490 x 500 x 850
153 x 285 x 155
152 x 203 x 203

17. USB ports

With more USB ports, you are able to connect more devices.
0
FABtotum: 4
1
0

18. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
77% have it

19. Prints in HIPS

The printer is able to print in High Impact Polystyrene (HIPS). HIPS is similar to ABS plastic, but uses different solvents (limonene rather than acetone). HIPS is easy to paint and glue.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
8% have it

20. Has an automatic platform calibrator

This feature saves time and effort in terms of maintenance, however the build platform itself still needs to be manually levelled.
Robox
MakerBot Replicator 2
Stratasys uPrint SE Plus
14% have it

21. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
20µm
Printrbot JR v2: 0.4µm
100µm
330µm

Top 10 3D printers

Add to comparison
    Compare
    This page is currently only available in English.