Romscraj M.O.B.
Romscraj M.O.B.
Top 90%11 points
Top 90%
Top specs and features

Romscraj M.O.B.: 19 facts and highlights

1. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Romscraj M.O.B.
45% have it

2. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
100µm
Printrbot JR v2: 0.4µm

3. height

381mm
Robox: 240mm

4. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Romscraj M.O.B.
70% have it

5. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Romscraj M.O.B.
76% have it

6. maximum creation size

This is the biggest size of object that you can print.
202 x 162 x 180
Bits from Bytes RapMan Education: 490 x 500 x 850

7. higher x-axis resolution

The highest possible x-axis resolution as measured in microns.
25µm
Robox: 2µm

8. higher y-axis resolution

The highest possible y-axis resolution as measured in microns.
25µm
Robox: 2µm

9. higher z-axis resolution

The highest possible z-axis (vertical) resolution as measured in microns.
5µm
Robox: 0.5µm

10. thickness

519mm
UP! Plus: 150mm

11. width

385mm
EnvisionTEC Perfactory Micro: 230mm

12. number of colors per print

A single design can be made up using different colored materials simultaneously.
1
Da Vinci 3D Printer: 12

13. USB ports

With more USB ports, you are able to connect more devices.
0
FABtotum: 4

14. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4

15. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Romscraj M.O.B.
51% have it

16. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Romscraj M.O.B.
14% have it

17. shipping weight

The shipping weight gives you the information about the all package weight.
31.5t
botObjects ProDesk3D: 30kg

18. weight

10kg
Printrbot JR v2: 9.1g

19. volume

76129.515cm³
Da Vinci 3D Printer: cm³

Top 10 3D printers

Add to comparison
  • Romscraj M.O.B.
Compare
This page is currently only available in English.