Sitecom WL-366
Sitecom WL-366
Top 64%5 points
Top 64%
Top specs and features

Sitecom WL-366: 18 facts and highlights

1. WiFi speed

A higher maximum Wi-Fi speed results in better performance. This is measured in megabytes per second.

2. Has 802.11n WiFi connection

802.11n is a wireless standard released in 2009. It has faster transfer rates and improved security compared to its predecessors - a, b and g.
Sitecom WL-366
79% have it

3. external antennas

More antennas result in increased signal strength. External antennas can be repositioned in order to improve the signal, and replaced with a longer antenna if needed.

4. Has a built-in network firewall

A network firewall protects a computer network from unauthorized access.
Sitecom WL-366
96% have it

5. Has QoS

With (QoS) Quality of Service, you can optimise performance by deciding which traffic to prioritise when a bottleneck occurs. You can decide which traffic is important based on things like IP address and type of Internet service.
Sitecom WL-366
87% have it

6. Has DoS protection

DoS protection guards a content network against DoS (Denial of Service) attacks. These flood a network with server requests, slowing overall traffic and potentially causing long term interruptions.
Sitecom WL-366
43% have it

7. Has a URL filter

URL filters are particularly useful if you want to allow different web access depending on the time of day, for instance allowing employees to use personal email outside of working hours.
Sitecom WL-366
55% have it

8. USB ports

With more USB ports, you are able to connect more devices.

9. Has WPA2-PSK

WPA2-PSK is a method of securing your network using WPA2 (Wi-Fi Protected Access 2) as well as a Pre-Shared Key (PSK) password. This was designed for home users without an enterprise authentication server.
Sitecom WL-366
90% have it

10. internal storage

11. Has Universal Plug n Play

Universal Plug n Play (UPnP) is a set of networking protocols that permits networked devices, such as PCs, printers, Internet gateways, Wi-Fi access points and mobile devices to find each other and exchange information on the network.
Sitecom WL-366
87% have it

12. Has IPsec Passthrough

You can enable IPsec Passthrough, to allow IPsec (IP Security Protocol) encrypted/authenticated data to pass through your router, enabling increased security.
Sitecom WL-366
76% have it

13. LAN ports

With more LAN ports you are able to connect more computers to the network directly using LAN cables.

14. WAN ports

A WAN (Wider Area Network) port is most commonly used to connect the router to the Internet. It can also be used to connect to an external private network.

15. warranty period

When covered under the manufacturer’s warranty it is possible to get a replacement in the case of a malfunction.

16. Has Network Address Translation (NAT)

With NAT you can use one IP address, e.g. that of the router, for a network of devices. It can increase security and make it easier to make changes to your internal network.
Sitecom WL-366
86% have it

17. Has PPTP Passthrough

You can enable PPTP (Point-to-point tunneling protocol) Passthrough. This allows VPN connections using PPTP to pass through the router with ease. This method is less secure than L2TP passthrough.
Sitecom WL-366
84% have it

18. Has a static IP address

Static IP addresses remain consistent on each connection. This means the IP address can be used to allow remote access / configuration. Most home devices have a dynamic IP address (ie. it changes), whereas larger companies usually use a static IP address.
Sitecom WL-366
74% have it

Top 10 routers

Add to comparison
  • Sitecom WL-366
Compare
This page is currently only available in English.