The Future is 3D Glacier PeakCubePro
Top 60%44 points
Top 60%
Top 7%102 points
Top 7%
The Future is 3D Glacier Peak
CubePro
vs
Top specs and features

The Future is 3D Glacier Peak vs CubePro: 15 facts in comparison

1. Has WiFi

The device can connect to WiFi.
The Future is 3D Glacier Peak
CubePro
20% have it

2. Creates support structures

The printer will automatically build extra structures to support the item as it is printing. The extra support can then be easily removed.
The Future is 3D Glacier Peak
CubePro
27% have it

3. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
The Future is 3D Glacier Peak
CubePro
45% have it

4. has an external memory slot

The device has a standard memory slot (such as an SD or micro SD card slot) so that you can either extend the internal storage with affordable memory modules or you can retrieve data, such as photographs, easily from a memory card.
The Future is 3D Glacier Peak
CubePro
35% have it

5. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
The Future is 3D Glacier Peak
CubePro
51% have it

6. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
The Future is 3D Glacier Peak
CubePro
56% have it

7. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
The Future is 3D Glacier Peak
CubePro
76% have it

8. weight

9.02kg lighter.
29.48kg
Printrbot JR v2: 9.1g
38.5kg

9. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
1
Hyrel Professional E5: 4
3

10. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
200µm
Printrbot JR v2: 0.4µm
75µm

11. height

33mm shorter.
558mm
Robox: 240mm
591mm

12. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
The Future is 3D Glacier Peak
CubePro
70% have it

13. thickness

274mm thinner.
304mm
UP! Plus: 150mm
578mm

14. width

31mm narrower.
609mm
EnvisionTEC Perfactory Micro: 230mm
578mm

15. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
The Future is 3D Glacier Peak
CubePro
51% have it
Add to comparison
    Compare
    This page is currently only available in English.