Zeepro Zim
Zeepro Zim
Top 31%76 points
Top 31%
Top specs and features

Zeepro Zim: 21 facts and highlights

1. Has WiFi

The device can connect to WiFi.
Zeepro Zim
20% have it

2. Uses fused deposition modeling (FDM)

Printers based on fused deposition modeling (FDM) use a thermoplastic filament, which is heated to its melting point and then extruded through a nozzle, layer by layer, to create the object. One of the main advantages of printers based on FDM is that they work with a wide range of materials.
Zeepro Zim
51% have it

3. 1.75mm filament diameter

The 1.75mm filament diameter is gradually overtaking the previous 3mm standard. The 1.75mm filament feeds into the printer with greater ease and allows for more detail in the printing process.
Zeepro Zim
56% have it

4. Has a heated build platform

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. This allows the overall print to cool more evenly.
Zeepro Zim
45% have it

5. Has plug and play feature

The device is set up and ready to be used with the included software.
Zeepro Zim
12% have it

6. number of extruder heads

More extruder heads allow you to use different colors and different types of material at the same time. A second extruder is also required to build PVA/PLA support structures around items as they are printed.
2
Hyrel Professional E5: 4

7. maximum creation size

This is the biggest size of object that you can print.
150 x 150 x 150
Bits from Bytes RapMan Education: 490 x 500 x 850

8. weight

9.07kg
Printrbot JR v2: 9.1g

9. height

406mm
Robox: 240mm

10. width

279mm
EnvisionTEC Perfactory Micro: 230mm

11. Prints in ABS plastic

The printer prints in ABS (acrylonitrile butadiene styrene). This is up to 30 times stronger than regular plastic and is commonly used in 3D printing.
Zeepro Zim
70% have it

12. Prints in PLA

Polylactic acid (PLA) is popular in 3D printing as it cools and sets quickly. Unlike ABS plastic, it is biodegradable and therefore better for the environment. It can be used to build support structures for other printouts, as it can then be dissolved leaving no marks.
Zeepro Zim
76% have it

13. 3D print speed

The speed at which 3d objects are printed, measured in millimeters per second.
110mm/s
Fabbster Kit: 600mm/s

14. USB ports

With more USB ports, you are able to connect more devices.
1
FABtotum: 4

15. Prints in PVA

Polyvinyl Acetate is another form of plastic used in 3d printing similar to ABS. It can be used to build support structures for other prints, as it can then be dissolved leaving no marks.
Zeepro Zim
14% have it

16. layer thickness

The thinner each print layer is, the more detailed you can make your designs. Layer thickness is often also referred to as resolution and is measured in microns (µm).
50µm
Printrbot JR v2: 0.4µm

17. Is pre-assembled

As the product arrives fully assembled, you do not have to build it from a kit.
Zeepro Zim
51% have it

18. nozzle size

The smaller the nozzle, the more detailed the final product can be. However, when speed of printing is of greater importance than detail, a larger nozzle may be preferable.
0.35mm
Robox: 0.3mm

19. number of colors per print

A single design can be made up using different colored materials simultaneously.
2
Da Vinci 3D Printer: 12

20. volume

37380.42cm³
Da Vinci 3D Printer: cm³

21. thickness

330mm
UP! Plus: 150mm

Top 10 3D printers

Add to comparison
  • Zeepro Zim
Compare
This page is currently only available in English.